Manual Calibration Pump / Pneumatic / For Pressure Generation

manual calibration pump / pneumatic / for pressure generation

-950 mbar ... +40 bar | LMP 40

manual calibration pump / pneumatic / for pressure generation

Contact us for advice solutions and equipment provider

Operation:

manual, pneumatic
Applications:

for pressure generation

The Pneumatic Calibration Handpump LMP 40 is well suited for all kinds of pressure equipment. It provides a pressure generation ranging from -950 mbar up to 40 bar. A coarse adjustment valve is incorporated. This enables it to attain the value measured precisely. A pressure relief valve is integrated. The handpump can be used in checking an instrument concurrently. It can also be employed for verification and calibration applications.

Để lại bình luận

View catalogue Go to the Leyro Instruments website for more information

Products relative

Flow sensors

calorimetric flow sensor / for liquids / air

calorimetric flow sensor / for liquids / air

New benchmark in thermal flow measurement Calorimetric flow meter for liquids and gases Optimised for water, oils, glycol and air Fast response time and integrated temperature measurement Red/green ...

electromechanical flow sensor / for liquids

electromechanical flow sensor / for liquids

... fluctuations Mechatronic flow sensor The new mechatronic flow sensor of the SBY series functions using the principle of a spring-mounted piston. The piston, located in the valve seat in the housing, ...

vortex flow sensor / with digital display

vortex flow sensor / with digital display

... Turbulence as a measure for the flow Behind a blunt body (or shedder) integrated in the measuring pipe, the flowing medium generates swirling vortices depending on the velocity. These vortices are detected ...

harsh environment flow sensor / programmable

harsh environment flow sensor / programmable

... electronically. The sensor is quick to install, and can be easily set up via the simple setting mode. Additional flexibility of installation is provided by the unit's unaffectedness to the orientation of the sensing face ...

flow sensor with analog output

flow sensor with analog output

celduc relais offers a range of magnetic flow sensors. Use celduc?s flow sensors to ensure minimum flows to your systems! - 1 open contact (A form) 250Vpeak - 100VA ...

turbine flow sensor / for gas / miniature

turbine flow sensor / for gas / miniature

The FLR1000 Series flow sensors are capable of quantifying low flow rates starting from 20 mL/min to 500 L/min. This makes these sensors ideal for a broad spectrum of applications like ...

thin-film flow sensor / air / insertion

thin-film flow sensor / air / insertion

0 - 20 m/s | EE671

EE671 is a compact air velocity probe for HVAC applications. The built-in flow sensing element VTQ combines the advantages of state-of-the-art E+E thin-film manufacturing and of the newest transfer molding technology. It ...

thermal flow sensor / air / insertion

thermal flow sensor / air / insertion

0 - 5 m/s | HD 103T.0

... very sensitive feature which is highly advised to be protected with a special protection. In the event of transportation, the sensor is encapsulated in a cylinder screwed on top of the probe.

Flow switches

gas flow switch / for liquids / compact / stainless steel

gas flow switch / for liquids / compact / stainless steel

The Aseptoflex Vario allows for compact flow monitoring in hygienic areas. It features the new G1 connection with 4 sealing options. It has been prepared and tested for use with process fittings of hygienic areas and is suitable for operation ...

gas flow switch / for liquids / with digital display / rugged

gas flow switch / for liquids / with digital display / rugged

This onsite control monitor is designed to connect flow sensors with ease and flexibility and its best used to keep track of field applications. There are several other uses of this control monitor such as connecting sensors that have ...

air flow monitor / remote

air flow monitor / remote

The Digtal Flowmeter, manufactured by Exair?, is used for monitoring the utilization of the air and the waste from a convenient location. It has a built-in button that when pushed, it will display the current air that is consumed from ...

optical flow switch / for air / in-line / process

optical flow switch / for air / in-line / process

The FSW800 Series air-flow monitor offers a simple and reliable alternative to indicate negative or positive air flow of fans. A bi-directional switch will activate an electrical contact if the air flow of the fan falls below 8.2 ft/s, ...

liquid flow switch / for gas / in-line / digital

liquid flow switch / for gas / in-line / digital

4 - 20 mA, max. 150 °C | DWM series

Electromagnetic Flow Switch and Flow Meter Flow Controllers - DWM 1000 | DWM 2000 For measuring electrically-conductive liquids, pastes and slurries Optional digital display No moving parts, maintenance-free The DWM 1000 electromagnetic ...

mechanical flow switch / for liquids / with indicator

mechanical flow switch / for liquids / with indicator

Features >> Large, easy-to-read dial >> Rugged design >> High line pressure design >> Vertical or horizontal mounting

liquid flow monitor / high-pressure

liquid flow monitor / high-pressure

max. 120 bar, max. 300 °C | DW series

Process pressure: 0 bar - 200 bar
Process temperature: 100 ?C

water flow switch / with display / digital / process

water flow switch / with display / digital / process

The PF3W digital flow switch series is suitable for applications that require a constant monitoring of the flow of cleaning or cooling water. It is manufactured by SMC a renowned name in pneumatics. The developers based its design on ...

Thermal mass flow meters and flow controllers

mass flow meter / thermal / for air / in-line

mass flow meter / thermal / for air / in-line

DN15, DN20 UND DN25 | EE741

Volumetric flow rate: 0.2 m?/h - 212 m?/h

mass flow meter / thermal / for gas / in metering tube

mass flow meter / thermal / for gas / in metering tube

DN15 - DN50, 0.5 - 200 Nm/s | EE771

The EE771 thermal mass flow meter for compressed air and gases provides mass flow, volumetric flow or standard flow readings unaffected by pressure and temperature. The flow meter, with its E+E hot-film sensor element that has high immunity ...

mass flow meter / thermal / for air / insertion

mass flow meter / thermal / for air / insertion

DN50 - DN400, 0.5 - 200 Nm/s | EE776

The EE776 flow meter is ideal for measuring the flow of compressed air and gasses in pipes from DN50 to DN300 and it is based on the thermal mass flow measurement. The consumption of compressed air, nitrogen, CO2 or other non-flammable ...

calorimetric flow meter / for compressed air / insertion / programmable

calorimetric flow meter / for compressed air / insertion / programmable

Process pressure: 16 bar
Process temperature: 0 ?C - 60 ?C
Volumetric flow rate: 548 m?/h - 29560 m?/h

calorimetric flow meter / for compressed air / with indicator-totalizer / programmable

calorimetric flow meter / for compressed air / with indicator-totalizer / programmable

Process pressure: 16 bar
Process temperature: 0 ?C - 60 ?C
Volumetric flow rate: 60 l/h - 700 l/h

calorimetric flow meter / for water / for liquids / in-line

calorimetric flow meter / for water / for liquids / in-line

Process pressure: 10 bar
Process temperature: 0 ?C - 60 ?C
Volumetric flow rate: 0 l/min - 0.2 l/min

thermal flow meter / mass / for gas / in metering tube

thermal flow meter / mass / for gas / in metering tube

Process pressure: 0 bar - 10 bar
Process temperature: 0 ?C - 50 ?C

mass flow meter / thermal / with flow conditioner / for gas

mass flow meter / thermal / with flow conditioner / for gas

Proline t-mass 65F

Process pressure: 40 bar
Process temperature: -40 ?C - 100 ?C
Mass flow rate: 1 kg/h - 3750 kg/h